|
|
|
|
#1
3rd March 2011, 12:04 PM
|
|||
|
|||
Just got back from Talon. Can i just say Phil is a fantastic chap and we started from 8:30am and stopped working at 9:30pm. His welding quality is superb! He really know his stuff. I would highly recommend Talon to everyone here and im looking forward to dealing with them again in the future.
Turns out my chassis is ok so thats good news. Only problem we had was my uprights for the front, upper rear brackets were 2mm wide on each side. After a few mods all ways good! Soon as i find some bushes and get some Epoxy -Mastic 121 the chassis will be rolling! 
|
|
#2
4th March 2011, 01:11 PM
|
|||
|
|||
|
just did all mine yesterday
what a headache plum lines makeshift jigs and wasers packing things in and out bits of studing. turns out i needed some packing for the front top back as a few people did back was out a smige but nothing too bad the rear brackets are not sposed to be dead central on the tubes of the diff box are thay? if so im worried big time 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
