|
|
#4
3rd March 2011, 09:43 PM
|
||||
|
||||
I think thats too small as the bottom of the taper is about 14-14.5mm. The one I used for my uprights is 19-20 at the end, I would say buy 2-3 of the same ball joints from different manufactures and measure very carefuly.
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334 Last edited by Talonmotorsport : 3rd March 2011 at 09:46 PM. 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode