![]() |
|
|
|
#1
|
|||
|
|||
|
Don't forget you can also use the granada diffs but you will need to extend the top left mount outward 17mm ( looking from the back of the diff) this will give you a few more options! Also I find the Granada LSD diffs are stronger and cost less.
|
|
#2
|
|||
|
|||
|
Thanks guys, i'm not too fussy about diff ratios, but it must be LSD. I started with the original 3.09 in the atlas but changed last year to a 3.77 when i fitted a bigger turbo to compensate for the increase in lag. I have over 350 ftlbs and climbing so i dont notice too much difference.
A 3.6 or a 3.9 would be fine. A dedion wont really fit as the centre of the tube has to sit behind the diff and my fuel tank is fairly close to the live axle as it is. I guess i will have to look at getting a book. The reason i looked at the haynes was because the parts were easily accessible on ebay. |
|
#3
|
|||
|
|||
|
Is the Stylus like the Fury ie same track width? If so you are into chopping down the drive shafts as the Roadster uses them as per the sierra.
|
|
#4
|
|||
|
|||
|
thanks for that, i did wonder if the stock shafts would be wider, i think i can get the shafts shortened, or new ones made but its an expense i could do with out. I was wondering whether an MX5 diff and shafts would be the right size. Of course that means using MX5 based uprights. I will have to look up some measurements.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|