Diff <-> Engine alignment/height

[minicountryman1961]

would you consider lowering the back of the transmission? I just did the engine mounts and transmission mounts for my car and I decided that I would tilt the engine/transmission assy down in the back to point the transmission directly at the diff.

Originally Posted by Eternal

Also the gearbox bell housing is about 40mm below the chassis. and this really bugs me as there is nothing i can do about that. in an ideal world i would like to do a sump mod on the steel sump and also raise the engine another 10-15mm lol but that would give 30mm height between diff and tranny