JohnW, the DOHC is bigger than the pinto in all dimensions. I have not seen the SOHC inlet close up for a long while - I can't remember if it is as huge as the twin cam one. I would have thought it should be nearer the centre line as the head on the pinto is much narrower. If you can measure from the centre of your engine to the outer edge of the manifold I should be able to compare that measurement on my car. If you have your scuttle and nose cone you could also run a straight line and measure how high the inlet sticks up above the normal bonnet line.
Enoch.
|
23rd March 2011, 08:32 AM
Threaded Mode