![]() |
|
#1
|
||||
|
||||
![]() Oooh 70s-80s Renault 5
The first thing that springs to mind is .... Rust ![]() ![]() Perhaps that was just Cornwall ![]()
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
#2
|
|||
|
|||
![]() No I can assure you it wasn't just Cornwall. That wasn't the worst rust bucket Renault did either. Anyone out there old enough to remember the Renault Dauphin?
Last edited by ayjay : 31st March 2011 at 09:16 PM. |
#3
|
|||
|
|||
![]() Well it gets worse after measuring everything for several hours this evening it appears the wishbones and hubs introduce a little more error as stated by Talon and Trick earlier in this post as well so when there fitted I have the following errors
Front Track NS 0 Front Track OS +3mm Rear Track NS +3 Rear Track 0 Not realy sure the best way to resolve seems I would need a lot of shims but at least it will go around left hand bends well ![]() |
#4
|
|||
|
|||
![]() Quote:
![]() i think i sweped one up in the workshop once for some reason my first boss had a thing for r4's and r5's the body roll was fantastic im sure you could get 30-35 deg then it would start to slide unrollable tho? |
![]() |
Thread Tools | |
Display Modes | |
|
|