|
|
|
|
#1
22nd April 2011, 07:39 PM
|
||||
|
||||
Ditch the original, there is too much play within time.
Get one of these but you will need the part the goes on the triangular part of the shaft to change it to round. Its the top bit in this pic:  
|
|
#3
22nd April 2011, 08:37 PM
|
||||
|
||||
|
Yes,
Here is a pic of ash's. It is positioned inside the drivers footwell as during iva he got asked to move it. I'm not sure what test you have to go through in SA. 
|
|
#4
22nd April 2011, 08:46 PM
|
|||
|
|||
|
steering column bush kit ?
I see what you mean but I still have to get that plastic thing from the uk well the whole steering column bush kit cause I can't get it here and please tell me that steel one were can I get one and does it come of any car or what ?
|
|
#5
22nd April 2011, 09:35 PM
|
||||
|
||||
|
I'm not Too sure if you can get it in SA, it's not from a car it's just an industural bearing. Have a google the codes that are in the eBay description and you may be able to find it.
|
|
#6
22nd April 2011, 09:43 PM
|
|||
|
|||
|
steering column bush kit
Oh ok do you perhaps know the name of it or how can I find it on ebay and tell me that plastic part that I need to use would it not be ok if I made one if I ha the dimensions?
|
|
#7
22nd April 2011, 09:56 PM
|
||||
|
||||
|
The link to the bearing is in my 1st reply and the one to the plastic bit is in the one from twin turbo.
More info on the bearing
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
