|
|
|
|
#1
22nd April 2011, 09:09 PM
|
||||
|
||||
I made my mushrooms from a diagram on here and the one thing I noticed between the drawing on here and John's mushrooms there is a 10mm difference in the thickness of material ie John's have 30mm thickness of alu for the taper to go through the ones in the drawing on here has only 20mm to go through so I would say you need a longer threaded draglink or have the mushrooms turned down a little 5mm off the top and 5mm from the inside....just my tuppeneth
|
|
#2
23rd April 2011, 05:58 AM
|
||||
|
||||
|
I'll try and get a picture of what I mean later today as I'm not explaining this well :S I got my mushrooms and bones from talon and my draglinks, balljoints, etc from saturn. The draglinks, mushrooms, and balljoints all fit together into my upright really nice and snug without having to apply any force really.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
