|
|
|
|
#1
28th April 2011, 09:42 PM
|
|||
|
|||
Dont know but would not be a fortune by someone like DHL,Paypal is easy.
Pm some details and I will look into it.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. 
|
|
#2
14th May 2011, 10:32 PM
|
|||
|
|||
maxi ball joint info
Hi everyone I saw a ball joint that has the same two holes for the bolts to tighten onto the wish bone but it also has another two on the side of it and I seen people use it on the locost I don't have a picture of it so that I can show you what I mean but does anyone know what ball joint that is and what sort of modification do you need to do to the wish bone to be able to use that ball joint or is it just a matter of drilling those extra holes ?
|
|
#3
15th May 2011, 02:52 PM
|
||||
|
||||
|
|
|
#5
15th May 2011, 03:11 PM
|
|||
|
|||
|
maxi ball joint info
Hi ozzy I just saw it on the net it is the one I'm taking about do you perhaps know what sort of mods do I need to do to the wish bone to use it or do I just need to drill those extra holes and will the tapper work for the sierra upright ?
|
|
#7
15th May 2011, 03:17 PM
|
||||
|
||||
|
Dont know what the taper is off hand.Maybe worth comparing the drawings of the locost to the haynes for the wishbones.
I have the maxi ball joints at home and cortina uprights.Away at work til fri so cant measure anything.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
