hi all
almost ash, i did a bit of anylisis on the suspension on the roadster a few months back i will have to dig out my results when i get home, IIRC it was more to do with roll center movement and this had some effects that i cannot remember without my results, i do seem to remember that the camber curve was not too great and the outher wheel does like to push out to positve camber under heavy load i did remidie this on mine by running a large amount of statc negative camber but found not suprisingly that i was locking up the front wheels under heavy braking.
Il did out my results when i get home and maybe post a CAD drawing if i still have them.
Tilly
|
4th May 2011, 04:38 PM
Hybrid Mode
