poor wood choice - Haynes Forums

		Haynes Forums > Haynes Roadster Forums > Chassis
poor wood choice

Thread Tools

Display Modes

bigjase poor wood choice 8th May 2011, 08:28 PM

shh120m What did you use? ideally you... 8th May 2011, 09:00 PM

leroybrown911 ask for machine finished ply... 8th May 2011, 10:01 PM

bigjase work table 8th May 2011, 11:38 PM

brainbug007 I used chip and it was... 9th May 2011, 06:35 AM

TheArf I opted to use framing timber... 9th May 2011, 05:26 PM

baz-r i avoided the sag issue buy... 9th May 2011, 06:40 PM

9th May 2011, 06:40 PM

baz-r

Senior Member

Join Date: Nov 2009

Posts: 1,464

i avoided the sag issue buy having my build board directly on the floor that was level and packers all the way round the outer edges until my frame was fully tacked up
just used stright 3x2 all the way round a 18mm std ply sheet then an + shape brace from the centers

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

All times are GMT +1. The time now is 01:12 AM.