|
|
#8
11th May 2011, 03:51 PM
|
||||
|
||||
Mike,
GRP2 should be square cut both ends as per my original PDF that you are using. I did however in the end notch the end of the diagonal tube as per Kev's photos above. The plates for the fuel tank want to sit inside of the diagonal tubes.  Hope that helps Cheers Dave
__________________
http://s831.photobucket.com/user/dav...ter%20Pictures OTR 01/05/14 - 1.6 CVH, Type 9, Bike Carbs, Megajolt 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode