|
|
#21
10th June 2011, 05:47 PM
|
||||
|
||||
Not good news im affraid. Emmissions were miles out, it doesnt seem to be firing properly on cylinders 1 and 4, and plug 4 had some oil on it when we looked at them. Think the headgaskets gone.
Also, the brake master cylinder tank seal has a leak. There was a few bits of edge trim etc that could have been done on the day, but not worth it because of the emissions. All in all, not a bad fail, could have been worse.  Big big thanks to the boys at Saturn for all their help and time. Really appreciate it!
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding. 
|
|
#23
10th June 2011, 06:16 PM
|
||||
|
||||
|
Free if i can get it done within 5 days... not gonna be easy!
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding.
|
|
#25
10th June 2011, 06:32 PM
|
||||
|
||||
|
Gaskets been ordered 8.30am
__________________
~ My Build Diary - http://davesroadster.blogspot.com/ *updated 7/6/11* Best bit so far: Getting it running Worst bit so far: Cutting steel for wishbones and engine mounts. Most annoying bit so far: Generator packing up half way through welding.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
at least its only £90 next time around 
.....get down to that unit an get stuck in
2 days work at best
Linear Mode
