![]() |
|
#2
|
||||
|
||||
![]() If the chassis is welded in the correct squence you don't get a bananna shaped chassis. You need to clamp the base rails down in about 16 places to hold it flat then weld methodicly around the rest of the assembled chassis using the heat of the welds to pull it against its self.
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334 |
Thread Tools | |
Display Modes | |
|
|