FF3 and suspension bracket

5th July 2011, 10:56 PM

Talonmotorsport Talonmotorsport is offline

Senior Member

Join Date: Oct 2007

Location: Southminster Essex

Posts: 1,323

yes you are correct the design in the book is wrong as you have proven with autoCAD. DO NOT NOTCH AND BEND FF3! Make FF3 in two independant sections weld the short upper section to FF4 then add the lower section while in the jig,when you make your front frame jig add two 90' uprights either side of the lower section of FF3 and clamp these SQUARE TO THE BASE OF THE JIG.

__________________
Website http://www.talonmotorfabrication.co.uk/

Direct email phil@talonmotorfabrication.co.uk

talonmotorfabrication@gmail.com

Mobile office hours 07514098334

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

All times are GMT +1. The time now is 11:54 PM.