|
|
#1
31st July 2011, 08:04 AM
|
||||
|
||||
Pulley
Where should the missing tooth on crank pulley sit when engine is at tdc?
|
|
#2
31st July 2011, 10:55 AM
|
|||
|
|||
|
90 deg off tdc,dont quote me........
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
|
#3
31st July 2011, 11:17 AM
|
||||
|
||||
|
Where the pickup is.
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
|
#4
31st July 2011, 12:55 PM
|
||||
|
||||
|
When you say pickup do you mean sitting under the crank sensor?
|
|
#5
31st July 2011, 03:01 PM
|
|||
|
|||
|
std is tooth 9 at the pickup normal 4cyl ecus and anything with edis (9th tooth after gap with normal crank direction of rotation)
megasquirt2 with direct vr pickup can run it anywhere see here http://www.msextra.com/doc/ms2extra/MS2-Extra_EDIS.htm Last edited by baz-r : 31st July 2011 at 03:12 PM. Reason: extra info
|
|
#6
1st August 2011, 09:01 AM
|
||||
|
||||
|
Nice one baz, thats exactly what I needed
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
