Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Engine/transmission
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 22nd July 2011, 10:13 PM
gaz05 gaz05 is offline
Senior Member
 
Join Date: Jun 2010
Location: Hexham,Northumberland
Posts: 278
Default What starter?

I'm looking for a starter motor for my build but not sure which one. I'm going to be running a 2.0L silvertop with 1.8 flywheel and type 9 box. Would I be right in thinking I should be after one from a twink?
__________________
Total cost so far
Materials £3,150
Tools £855
Reply With Quote
  #2  
Old 22nd July 2011, 10:36 PM
rich's Avatar
rich rich is offline
Senior Member
 
Join Date: Dec 2010
Location: Tamworth
Posts: 107
Default

i have a 2.0l black top with a 1.8 silver top flywheel to a type 9 box.
I managed to find a brand new gear reduction starter that is made to fit a 2.0l sierra pinto. Fits nice and turns over a treat but had to modify the black top sump as the starter fits the opposite side on a focus gearbox.

Ok sounds complicated but most people can supply gear reduction starters that replace the OE lucas starters that do the same job, see my photos

reason for gear reduction, smaller diameter caucus (motor)
Reply With Quote
  #3  
Old 23rd July 2011, 12:02 PM
mark mark is offline
Senior Member
 
Join Date: Mar 2009
Location: Billingham (north east)
Posts: 770
Default

Im using cvh starter with mine and a 1.8 silvertop flywheel

Works fine just had to masasage the sump a little for clearance
Reply With Quote
  #4  
Old 24th July 2011, 07:42 PM
baz-r baz-r is offline
Senior Member
 
Join Date: Nov 2009
Posts: 1,464
Default

lucas LRS707 or equilvent
Reply With Quote
  #5  
Old 25th July 2011, 08:27 PM
gaz05 gaz05 is offline
Senior Member
 
Join Date: Jun 2010
Location: Hexham,Northumberland
Posts: 278
Default

Cheers lads. Looks like I need a CVH one then.
__________________
Total cost so far
Materials £3,150
Tools £855
Reply With Quote
  #6  
Old 26th July 2011, 07:28 PM
baz-r baz-r is offline
Senior Member
 
Join Date: Nov 2009
Posts: 1,464
Default

lrs707 type fits cvh sierra cvh, i4 dohc sierra and granada i4 dohc engines

think there is a diesel higher power one that fits but was unable to track down what one it was
Reply With Quote
  #7  
Old 26th July 2011, 09:54 PM
gaz05 gaz05 is offline
Senior Member
 
Join Date: Jun 2010
Location: Hexham,Northumberland
Posts: 278
Default

I had a diesel one from the donor baz but it was miles out.
__________________
Total cost so far
Materials £3,150
Tools £855
Reply With Quote
  #8  
Old 2nd August 2011, 09:31 AM
gaz05 gaz05 is offline
Senior Member
 
Join Date: Jun 2010
Location: Hexham,Northumberland
Posts: 278
Default

Right then. Anyone got a cvh one lying about that they'd like to sell?
__________________
Total cost so far
Materials £3,150
Tools £855
Reply With Quote
  #9  
Old 3rd August 2011, 07:36 AM
adrianreeve adrianreeve is offline
Senior Member
 
Join Date: Mar 2007
Posts: 401
Default

Be careful, there are two LRS707 models, one is 3.5" diameter, one is 5.5" diameter, and the bigger one fouls the sump. Even then, you may find that the throw on the LRS707 isn't long enough to engage with the ring gear on the flywheel.

I ended up having to become a ford starter motor nerd when researching which one would fit, and in the end an LRS543 fitted mine (2.0l Silvertop with 1.8 flywheel and type 9 gearbox.)

I think the difference comes because ford made a few variations of bellhousing depth over the years, so when you have a real mongrel collection of parts (as I did), things can get complicated.

Hope that hasn't confused the issue too much!

Cheers

Adrian
__________________
My Build Pictures:

http://s1234.photobucket.com/albums/ff406/adrianreeve/
Reply With Quote
  #10  
Old 4th August 2011, 11:00 PM
gaz05 gaz05 is offline
Senior Member
 
Join Date: Jun 2010
Location: Hexham,Northumberland
Posts: 278
Default

Cheers Adrian

Does anyone know which car this came off (LRS543 ). There are loads of starter come up on Ebay that came off a particular car but no code number.
__________________
Total cost so far
Materials £3,150
Tools £855
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 01:15 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.