Ford EEC-IV wiring (1993 Mondeo, Zetec 2.0)

[big_wasa]

Originally Posted by alga

As for deleting pluse air, canister purge and EGR sensors & valves, I haven't been able to try it out yet.

No you will be fine with out these and more besides. Such as the air con presure switches and other load adjusters like the heated windows and clutch.

It also runs fine with out the speed sensor But I do plan on refitting that as there are meant to be other gains such as fuel cut on over run ect.

Dont limit your self to the early eec-iv as the Pat's is no big deal as long as you have the matching key and you gain the obd2 function.

Ive done several and had one I did through iva

Pre 95 deep ecu

http://youtu.be/Pxq4ks2Us_U

Post 95 (1997)104 pin eec-v with Pats owls ecu

http://youtu.be/BKqeCjdBM0w

1999 104 pin eec-v with pats Olw5 ecu. This was wired for a midi and shows how few connections there are. Done so the user only had perm live switched live, a few earths, fuel pump and there is one for the tacho.

http://youtu.be/pUbV0NPvx4M