|
|
#5
8th August 2011, 09:23 PM
|
||||
|
||||
just whipped up a quick drawing on CAD, the prop is about 630mm long, at this length the offset between the gearbox and diff can be a maximum of about 30mm, seems a fair bit to me, mines about 12mm at the moment so i think im going to stick close to that (may move the engine and box over slightly to allow for better access to the clutch mechanism.
Ta very much JakeH
__________________
its reight! is not a suitable measurement! 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode