peddal box supply or group buy?

[Talonmotorsport]

Will the back plate be bent for the asking price or are you planning on having the plate cut short then let people find some angle to weld on? Although £25 is a very good price if it's just supplied as flat sections. I'm still waiting on my laser place to get back to me they've had the pedal box drawings 2 weeks already

[robo]

Whats the latest on this? Is someone going to be making book versions of the pedal box? Sooooooooooooooonish?

Also need to know how to tell the difference between a type 9 gear tunnel and the other version. What i have works for me but i dont know what i have.

Bob

[brainbug007]

I'd be interested in this, although I thought the book spec for the pedals was too thin at 3mm and should be done in 5mm as they tend to bend easy?

[vmax1974]

Put me down for a set

[baz-r]

its all flat bits made to weld together to make life easy and more sutable to tweek to suit your build
brake is 5mm thick with the weak point removed and the clutch is 3mm as is the throttle(no chance on the throttle bending)
i could up the clutch thickness but it will effect the price or i could add one extra clutch arm plate and you could weld two together (easy option at £1.50 extra)
or how about braceing it with somthing that is what im planing as the cable may not fit if its thicker also i understand its bending only on short throw clutches (zetec fwd clutch plates) without moving the cable hole nearer to the pivot point

as soon as i have 10 order is going in btw

if you want just copy and paste yourself into the list with any extras you want

[baz-r]

1.baz-r (std t9 41mm hole)
2.vmax1974
3.
4.
5.
6.
7.
8.
9.
10.

[kechiche]

hi buz-r i have been refered from a guy of ebay he may be here as a member i have lost a auction on ebay for floor mouted pedal box made out of still and have ask him if he got a spair one he said get in touch with if you do have spair one as i read your thread it look like you may be able to help me,
so i am building a haynes roaster and desperate for floor mount pedal box it has to be floor mount cause of my chassis lay out,pls see what you can do and let me know,thanks Alex

[brainbug007]

I'd be interested in a set of the bits for the seat belts then

[baz-r]

Originally Posted by kechiche

hi buz-r i have been refered from a guy of ebay he may be here as a member i have lost a auction on ebay for floor mouted pedal box made out of still and have ask him if he got a spair one he said get in touch with if you do have spair one as i read your thread it look like you may be able to help me,
so i am building a haynes roaster and desperate for floor mount pedal box it has to be floor mount cause of my chassis lay out,pls see what you can do and let me know,my email ,thanks Alex

well for a start its baz-r! welcome to the site
what you need to do is cut and paste the list into a new post and add your name to it
it would also be a real good idea to remove your email address buy using the edit button on your last as you never know who or what its going to be used for in the internet!

[baz-r]

Originally Posted by robo

Whats the latest on this? Is someone going to be making book versions of the pedal box? Sooooooooooooooonish?

Also need to know how to tell the difference between a type 9 gear tunnel and the other version. What i have works for me but i dont know what i have.

Bob

the mt75 is thinner in the foot well area there is details in the amendments section