|
|
|
|
#1
3rd September 2011, 10:57 PM
|
|||
|
|||
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg. 
|
|
#2
4th September 2011, 07:27 AM
|
||||
|
||||
|
Looks Good
 TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
|
#3
4th September 2011, 07:31 AM
|
||||
|
||||
|
you should be able to post the picture directly on the forum, should be some options under the share menu at the top of each picture.
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
|
#4
4th September 2011, 10:58 AM
|
||||
|
||||
|
Something like this ( under share menu above photo, then get link)
 Edit: get can't add the link on iPhone, right click on image, click on 640x480 size, then right click on photo copy image location. Hope that helps Last edited by SeriesLandy : 4th September 2011 at 11:02 AM.
|
|
#5
11th September 2011, 10:22 PM
|
|||
|
|||
|
After lots of measuring, re-measuring and a bit more measuring I cut the aluminium for the floors over the weekend. An engineer friend of mine said he would do it for me but he has been on the sick so I had to do it myself. I am now ready to drill the first hole in my chassis which seems a little daunting!!.
I have put some pics on my flickr accounts. Also does anyone know the size of the bolts used for the rally design alloy steering rack clamps... are these UNF. I have only just worked out Metric bolts!!
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg.
|
|
#6
12th September 2011, 07:08 AM
|
||||
|
||||
|
A floor transforms the look. Enjoy fixing it in place.
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
|
#7
12th September 2011, 09:18 AM
|
||||
|
||||
|
Standard M8 metric bolts will be just fine for the rack clamps
Just make sure that they are at least 8.8 grade tensile strength  Can't remember the length but long enough for a flat washer on top of the clamp & a penny washer underneath the rack support bracket, then nylock nut & leave a few threads spare
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk
|
|
#8
12th September 2011, 12:09 PM
|
||||
|
||||
|
Hi David,
That's looks nice laid out in the garage, need anything then just give us a shout. Cheers........AndyH
__________________
Haynes Roadster / Saturn GRP Bodywork. Now available direct through http://www.gillhamonline.co.uk/ or contact me direct on andrew.hugill@ntlworld.com Regards..........AndyH
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
