Where does this go?

[shaun]

The 12v ign feed will come from the ignition switch, not sure which terminal. Should be live when the key is in the run position. Hope this helps.

Shaun

[twinturbo]

you should have an ignition coil with + - connections, but looks like your missing the filter as you need a female fitting not the male one.

[brainbug007]

Hmm total nub questions then, what does the ignition coil look like?? Is that the same thing as the coil pack? I don't remember having anything over that side of the engine other than the alternator, starter motor, & power steering pump?

[twinturbo]

Metal cylinder , appx 15cm long , 5cm diamiter, with spark plug king lead. Found on inner wing.

TT

[brainbug007]

Hmm don't remember seeing anything like that, does it matter that mine was a distributorless setup(1.8 cvh R6A)?

[twinturbo]

Your probably right on that, can't say i have ever paid a vast amount of attention to the 1.6CVH setup.

Do you have the coilpack?

That fitting may well be superfluous on that car, I think it's part of the body loom and not the engine loom so would be present regardless of engine.

Coilpack will get it's +12V from the engine loom.

TT

[brainbug007]

Ya I've got a coilpack. Pretty sure the part in question was connected to something though as I labeled & numbered it but now can't find the corresponding number on my pile of bits If it is superfluous, any idea what else I won't have connected to be able to turn the engine on?