Yup that's definately how I wired it up, thick red onto the copper colored screw (red arrow), small red & black striped wire onto the screw you marked black (I changed this after davedew's note) and this sits closest to the floor when the starter is mounted. Also as mentioned there's a really thich black wire on the same section of the loom which I have bolted onto the gearbox. When I get home tonight I'll recheck the readings with the thin red/black striped wire disconnected. Also sorry for being a bit thick/new with this but can you explain what you mean and how to do "do a continuity test between the ignition switch +ve terminal and the lead at the battery"?
|
13th September 2011, 10:53 AM
Threaded Mode