|
|
|
|
#1
4th October 2011, 08:07 PM
|
||||
|
||||
Well I've ordered a new set so I'll replace them when they show up. Hopefully when I get it all back together it'll start this time!
|
|
#2
4th October 2011, 08:15 PM
|
||||
|
||||
|
Bolt it back up with the old gasket anyway, don't do the bolts mega tight.
Then check it turns over by hand so we know that's fixed.. There is one possibility that I forgot although it's slim but should be checked anyway. It's possible the water pump is very very seezed. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
|
#3
5th October 2011, 08:36 AM
|
||||
|
||||
|
Ok well I'll try turning it over by hand again tonite with the old gasket, shame it's not really re-usable as its only been on for a couple of weeks
 Is the water pump the pulley directly above the crank pulley and below the tensioner? If so I tried turning this by hand this morning and no issues there.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
