Rear drive shafts

[twinturbo]

Your unlikly to find any of these!

http://www.haynes.co.uk/forums/showthread.php?t=7006

[DaveyB]

Hi, thanks for the help, do you think it would be better to try and find an assembly of diff /drive shaft and drums that were all on the same car or would it be ok getting diff and drive shaft and then hubs all seperatley

thanks
DaveyB

[wylliezx9r]

Originally Posted by DaveyB

Hi, thanks for the help, do you think it would be better to try and find an assembly of diff /drive shaft and drums that were all on the same car or would it be ok getting diff and drive shaft and then hubs all seperatley

thanks
DaveyB

Its fine as long as you mach the shafts with the diff.
saying that though its probably much easier getting it all as a set.

[snapper]

Decide whether you want drum or disc rear end as the hubs are also push in or bolt on.
There is a way of making a drive shaft with push in at the hubs and bolt on at the diff but requires Desiel push fit shafts with the tripod removed at the diff end and replaced with a Lobro.

[phil clegg]

sorry to tag on ,but ive got a pair of diesel push fit shafts if anybody needs them ,thanks phil

[baz-r]

here is a bit of a Q if i wanted to go lsd in the future and i have push fit shafts, diff and drum back end is the only way of doing this to swap shafts to lobro type and hubs etc. or has some co. made a conversion kit?
i have seen push fits back ends converted to take discs but never thort about lsd conversions