MX5 Seats

[spud69]

The seats are ideal basic / comfortable seats for the roadster. They would fit but you would need to remove the ratchet mechanism from either side of the seat and lock them off. The runners are only 13" centers and would fit fine with the foamy sides squeezing down into the car.

If you need more dims then give me a shout.

AndyH

[Deanno]

cheers Spud,
does the mk / year make a difference in seat size?
have you done these in a roadster?

[spud69]

Originally Posted by Deanno

cheers Spud,
does the mk / year make a difference in seat size?
have you done these in a roadster?

I've not compared the seats up close but i believe the Mk1 seat to be a more compact / basic seat to the Mk2. Not sure if they went for electric seats to for the Mk2.

AndyH

[Deanno]

cheers for that, my mate's got the mk2 and his does not have electric seats.

[PorkChop]

One thing to remember (with the mark 1 seats at least) is that the mountings for the sliders are at an angle to the sliders themselves. However, there's very little distance between the very bottom of the seat and the bottom of the flat part of the runners, so they will still sit very low if needed. The mounting tabs protrude about an inch or so past the flat bit of the runners, if that makes sense.

[skov]

Chris did some work narrowing some Mk1 MX5 seats to fit, have a look here:

http://www.haynes.co.uk/forums/showthread.php?t=6206