rear upright jig issue!

[ozzy1]

Cant see any ammendments to this part?
http://www.haynes.co.uk/forums/showthread.php?t=2430

Personally didnt like the book jig design.Can simply drill some box section with the hole at the correct height and then postion it at the dimension and then bolt the parts together through the box section and just lift it up to sit correctly.
Sorry thats all i can do from memory book at home 1500km away.

[Bonzo]

Here's the picture for you Tony



Not sure what the problem could be, like Ozzy, I made my own jig up for the rear uprights.

I am not aware of any amendments in that area.

Sure that someone will soon spot the problem

[onedayTM]

Thanks ozzy and to you ronnie, the height gauge is set to where the hole centre should be which is roughly how much the plate sits above the 5inch tube. If I lower it then the template as per the book will be out. So what to do? Like ozzy says remake jig but to dimensions as page 70 then check all other dimensions when tacked up? Back to the drawing board then, tell me ronnie how did you get photo downloaded to forum.
cheers guys
tony

[Bonzo]

Sorry Tony, I meant to answer your question a lot earlier

Copied from an earlier post

There are umpteen ways to post pictures but here is how it all works for a computer numpty like me

I use the photo hosting site " Photobucket " this is free to join & use.

Usually load my pictures from my camera to the pictures folder on the PC, I then upload them to my Photobucket account.

When my pictures on Photobucket & hover the cursor on an image I wish to use, Photobucket will list a drop down menu containing image addresses & the likes.
At the bottom of the list, you should see the one that says Image code ( That's the one I use )
Right click the Image code address, then copy, start typing your forum post & when you are ready to insert your image, right click & choose paste, that should insert the image code for you.

If you want to check that all is well just click on preview post.

The photo will stay on the forum for as long as it is still in your Photobucket album.

Hope that is of some help to you



Hope you have sorted your upright issue out

[onedayTM]

cheers ronnie, I did actually try to get it from photobucket aswell but no luck, I must be a bigger numptee than you, give me a welder anyday.
cheers
tony