|
|
#7
21st November 2011, 11:38 PM
|
||||
|
||||
You could get them ground down by the 1mm by a company with a cylindrical grinder as they grind hardened stuff all the time.The only thing i wonder is are they only case hardened as removing 1mm will most likely removed the hardened depth..
Also you would want the size to be accurate as the wheels locate on here and if its undersize you will be putting all the load on the studs only. Last edited by ozzy1 : 21st November 2011 at 11:40 PM. 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode