Torque Settings

[ozzy1]

Here are some and a few other useful ones taken from the Haynes manual

Suspension bolts
Damper bolts 60-70 Nm
Engine mounts 50-70 Nm
Gearbox bellhousing (auto listed only) 30-37 Nm
Starter motor
Front and rear uprights
Seatbelts 29-41 Nm
Steering wheel nut 45-55 Nm
Tie rod end locknut 57-68 Nm
Tie rod to steering rack balljoint 72-88 Nm
Intermediate shaft to inner column clamp bolt 20-25 Nm
Flexible coupling to steering gear clamp bolt 24-26 Nm
Column mounting pinch bolt 45-55 Nm
Clutch cover to flywheel 21-25 Nm
Calliper carrier bracket to hub carrier bolts 51-61 Nm
Front calliper guide bolts 20-25 Nm
Rear calliper guide bolts(ABS) 31-35 Nm