bending SS1 - Haynes Forums

rapidtornado bending SS1 16th December 2011, 07:45 PM

Talonmotorsport Have you got any large... 16th December 2011, 08:06 PM

rapidtornado hmm good call.... maybe I'll... 16th December 2011, 08:10 PM

voucht If you can find a cylinder... 16th December 2011, 08:23 PM

rpjg1975 I found the easiest way was... 16th December 2011, 08:30 PM

rapidtornado good tip cheers 16th December 2011, 08:33 PM

voucht I tried this, but the 3mm... 16th December 2011, 09:34 PM

rpjg1975 I'm used to working on... 16th December 2011, 10:08 PM

alga I made a rough curve "on... 17th December 2011, 06:52 PM

17th December 2011, 06:52 PM

alga

Senior Member

Join Date: Feb 2009

Location: Vilnius, Lithuania

Posts: 1,249

I made a rough curve "on my knee", then tacked it to the laser cut plate, and it turned out great.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

All times are GMT +1. The time now is 05:53 AM.