Wing stays

[shh120m]

best thing to do is to tack the stays up on the car, with your final wheels and tyres fitted. They are a bugger to get right, thats why its easier to make them in situ

[Ashtonr]

Would suggest you use 5mm steel bar if you are going to follow the book drawings if you use the 3mm recommended they will flap about when you drive the car. I remade mine using 13mm tubing which seems ok

[ozzy1]

I thought AshG was gonna post some pics etc of the way the new ones are on the Mev as it was a simple yet effective design(or maybe i imagined it )