Spigot rings

[alga]

[Granny eggs disclaimer], you're probably aware that the offset on PSA wheels is 15-25 mm instead of ~38 mm on Ford, so you'll get 3-4 cm extra track width, and it might negatively impact the steering. Extra load on the wheel bearings is probably irrelevant as the car is so light.

[twinturbo]

I used to run some Pug offset wheels on our old Mondeo. It cornered very well but steering was a bit skittish...

TT

[DRCorsa]

Originally Posted by alga

[Granny eggs disclaimer], you're probably aware that the offset on PSA wheels is 15-25 mm instead of ~38 mm on Ford, so you'll get 3-4 cm extra track width, and it might negatively impact the steering. Extra load on the wheel bearings is probably irrelevant as the car is so light.

Yes, i already knew that, but anyway i have bought a set of some nice Ford wheels. I would like a bit more offset to get a scrub radius closer to zero, but anyway you need a bigger budget to have things exactly as you would like them.

[AnguS]

get some rings laser cut........
i have a contact if you havent

dave

[DRCorsa]

Thanks Dave but i don't need them anymore as i have already bought a set of wheels that don't need any rings.