|
|
|
|
#1
5th February 2012, 02:51 PM
|
||||
|
||||
No progress on the car this weekend, but I did manage to build something else:
  Is it just me or does anyone else turn into a big kid when it snows  
|
|
#3
5th February 2012, 04:09 PM
|
||||
|
||||
|
I take it you haven't been blessed with any down in Devon
 We woke up to 4 or 5 inches of it. Just a shames there's no hills out here in the Fens 
|
|
#5
5th February 2012, 04:21 PM
|
|||
|
|||
|
The sun is shining, the dog been for a 5 mile walk. It's realy nice winters day.
Terry
__________________
If you need a friend, call me, if u need company call me, if you need help call me, if u need money this number is no longer available.
|
|
#7
5th February 2012, 05:52 PM
|
||||
|
||||
Car looking sweet John,
I notice on the photo you have negative camber on your rear wheel. Do you still have plenty of adjustment on the lower wishbone even with a half locking nut in place to take this out? The reason I ask is Lukes car is the same as your photo but has little adjustment left to take this out. Is it possible for you to measure the centres of both top and bottom wishbones (centre of bush to centre of hub upright fixing point) please...  I just want to check that our wishbones are the same as yours as we made ours to SSC drawings and I know yours are from Andy.. Cheers Johno....ps I think we had the worst of the snow in our area as I had to dig our cars out..
|
|
#8
5th February 2012, 09:52 PM
|
|||
|
|||
|
Nice to see the build pictures coming along.
Did you take any measurements or did you draw a diagram when you made the engine mounts? I am using a 1.6 myself and want to get around the bonet clearance problems. If so please can I have the details David
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
