Gear Monkey's Build Blog

[will_08]

Looking good guys, a super start.

Keep it up!

[Gear Monkey]

Thanks Guys I appreciate your comments

I've spent a few more hours measuring, cutting and deburing so here's the latest pics. Sorry they're not a little more interesting.

http://flic.kr/p/bqXtsK

http://flic.kr/p/bqXtwv


Paul

[andysredmini]

Don't forget to allow for the distortion caused by welding the bend / notch on the front frame uprights.
I found through trial and error they pulled in by about 1.5deg when i welded mine. I welded some samples in different orders e.g inside first then sides, or sides first then end, to try and prevent it but in the end just opened them up a bit before welding.

Regards

Andy

[Gear Monkey]

Thanks for the info Andy