Baseboard from MDF? - Haynes Forums

cirrusjock Baseboard from MDF? 7th March 2012, 09:34 AM

mark Its no more likely to set on... 7th March 2012, 12:05 PM

ozzy1 I built mine from 22mm... 7th March 2012, 12:43 PM

skov I used MDF too (25mm I... 7th March 2012, 01:08 PM

TheArf I built mine with 19mm mdf,... 8th March 2012, 08:13 PM

John P I used MDF but would go for... 9th March 2012, 02:26 PM

MarkB Ply is better as MDF is a... 13th March 2012, 09:52 AM

cirrusjock Thanks guys, I ended up... 13th March 2012, 11:35 AM

7th March 2012, 01:08 PM

skov

Senior Member

Join Date: Jan 2011

Posts: 1,085

I used MDF too (25mm I think). It was ok, but it did sag fairly quickly in areas where it wasn't well supported.

I did set it on fire once or twice when welding, but it doesn't burn very fast and is easy to pat out if you're wearing welding gloves

__________________
Photo Album1
Photo Album2
Photo Album3

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

All times are GMT +1. The time now is 12:59 PM.