![]() |
|
|
|
#1
|
|||
|
|||
|
find a wheel restorer
a blast ,powdercoat primer and sprayed top coat is about £65 approx a wheel including any filling if you want somthing nice and long lasting ![]() |
|
#2
|
|||
|
|||
|
I am only looking for a short term option so dont want to pay so much for each wheel. I have got a set of mx5 daisy alloys and am in the process of cleaning them up. I am going to polish the outer rim and paint the spokes and inner rim black. Once my car is on the road or funds are sufficient I will buy some nice new ones.
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg. |
|
#3
|
||||
|
||||
|
I use top be the paint sprayer in my work and i use to do wheels for a few rally cars and all i did was shot blast them, etch primer and a top coat white 2-pac paint.
The pic below is one of mine. ![]() when i was into modifying cars i did a set in anthracite rubed them down with sandpaper, used filler primer from halfrauds and a few cans of anthracite later they looked brilliant considering they were done with rattle cans. hope this helps
__________________
My Blog: deannoshaynesroadster.wordpress.com (under construction) Being overtaken is a sign of weakness. South Wales Kit Car Club www.southwaleskitcarclub.co.uk WWW.HELPFORHEROES.ORG.UK XBox Gamer tag: D34NNO Last edited by Deanno : 16th March 2012 at 08:49 PM. |
|
#4
|
||||
|
||||
|
one tip i have learned was if you paint alloys with the tyres on put some washing up liquid on a brush and apply it to the tyre, any overspray can be washed off (Once the paint is dry
)
__________________
My Blog: deannoshaynesroadster.wordpress.com (under construction) Being overtaken is a sign of weakness. South Wales Kit Car Club www.southwaleskitcarclub.co.uk WWW.HELPFORHEROES.ORG.UK XBox Gamer tag: D34NNO |
|
#5
|
|||
|
|||
|
I finally got around to having a go at painting one of my wheels. here is a photo of before and after..
here is the link: http://www.flickr.com/photos/6711258...in/photostream
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg. |
|
#6
|
||||
|
||||
|
Quote:
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
|
#7
|
|||
|
|||
|
Quote:
Bob
__________________
When The Results Disagree With The Theory: Believe The Results And Invent A New Theory If I had two brains I,d still be a halfwit The cave http://s1116.photobucket.com/user/my...deshow/mancave The build http://www.haynes.co.uk/forums/showthread.php?t=12669 |
|
#8
|
|||
|
|||
|
I decided to use the mx5 wheels as they are a bit similar to minilites. In fact a jap rip off of them. They are also very light and I have read that if they are changed they will probably be heavier. They were also free so managed to save 65 x 4 at least.
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|