Urgent cage advice needed :D

[minicountryman1961]

Originally Posted by wylliezx9r

No not a requirement

So if the roll bar is not required, is there a requirement regarding tubing size? Seems unlikely.

[Luke2842]

The roll bar only needs to be substantial if the harnesses are mounted to it, obviously in the iva's view. That's why there needs to be 2 bolts on each backstay and so on.

[mark]

Originally Posted by Luke2842

The roll bar only needs to be substantial if the harnesses are mounted to it, obviously in the iva's view. That's why there needs to be 2 bolts on each backstay and so on.

My car passed IVA with good comments about my rear stays that extend to the rear lower edges of the chassis with 1 bolt in each side

They were m14 though!