![]() |
|
#1
|
|||
|
|||
![]() I used a capri one on my clutch --which is far better but I dont know about the handbrake
|
#2
|
||||
|
||||
![]() I think I might be getting mixed up with the clutch and handbrake cables in regards to the capri one. I've just ordered a capri clutch cable.
So is the sierra handbrake cable definitely the way to go?
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9 My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020 Total Spent so far: Stopped counting ![]() |
#3
|
|||
|
|||
![]() Fix the Sierra one into the car Simon and fit one side to the shoes.slacken the cable adjuster back far enough to give you plenty on the cable when the shoes etc are adjusted,fit the other side and measure the amount you need to cut off and use a small bolt cut down and drilled the right size for the cable to be welded into,dont forget to put the spring on aswell.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. |
#4
|
||||
|
||||
![]() Cheers Paul, just ordered one from ebay. How is your car going?
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9 My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020 Total Spent so far: Stopped counting ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|