|
|
|
|
#1
14th May 2012, 02:40 PM
|
||||
|
||||
I got the GBS one. The height seems fine, but the runners need to be extended by 4 cm. Go figure! It had a "£175 inc Zetec Narrow" tag tied onto it.
Here are some detail piccies if you want to know what to expect: https://picasaweb.google.com/1008810...itSparesHeader
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate. Last edited by alga : 14th May 2012 at 02:44 PM. 
|
|
#2
14th May 2012, 08:47 PM
|
|||
|
|||
|
GBS system inc cat fitted perfectly on the Teamtrain car with Saturn engine mounts for the Zetec.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
|
#3
8th June 2012, 04:47 PM
|
||||
|
||||
|
OK, so GBS sell two kinds of manifolds: Narrow and GT (now both are available on their kitspares.co.uk web shop). GT is 4 cm wider and is a perfect fit for me. My crankshaft is 13 cm above the bottom of the chassis, as per book (bellhousing sticking out by 25 mm)
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate. Last edited by alga : 8th June 2012 at 04:51 PM.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
