![]() |
|
#1
|
|||
|
|||
![]() Lacquer will not adhere to aluminium on it's own. You need to use an etch primer to bite into the surface. It is possible to get a clear etch primer which can then be lacquered.
|
#2
|
||||
|
||||
![]() why not go for clear etch lacquer instead like this
http://www.ebay.co.uk/itm/1-LITRE-1K...#ht_587wt_1063 |
#3
|
|||
|
|||
![]() That stuff looks the biz.
Cheers Kev ( Just about to get onto the side panels so will need to do something to it soon) |
#4
|
|||
|
|||
![]() Or get it sprayed with this stuff
http://www.sprayonchrome.com/index2.html perfect, see http://www.sprayonchrome.com/spectrachromebike.html TK
__________________
Innovation not Imitation!
|
#5
|
|||
|
|||
![]() Plastic primer is clear and will do exactly what you need to make the laquer stick.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. |
#6
|
||||
|
||||
![]() and I thought the course surface of the brushed ally would make the clearcoat stick/grip
![]() |
#7
|
|||
|
|||
![]() lots of paint dont like sticking to ally that is why etch prime is a must (no good for clear)
rule is if its a soft metal paint will not like sticking to it ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|