bare ally is hard work but is a lot lot cheaper - like nowt but finger print removing with the constant cleaning... been there done it wit the dax rush.
finger prints are even hard to keep off - but it can be done. best way to polish it is one of those wet n dry pads - keep the strokes long from end to end and it will look great.
panels can be sealed with sealer in the joints like clear stuff is fine.. trim off excess so noone knows
does look good in bare - would recommend a compressor air blaster to THOROUGHLY DRY the hard to reach gaps you can dry.
you must dry it every time it gets wet
|
3rd June 2012, 12:05 PM
Hybrid Mode
