|
|
|
|
#1
18th June 2012, 06:26 PM
|
||||
|
||||
You will need the ESC-2 module to go with it then, as well as the loom.
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders 
|
|
#2
20th June 2012, 08:22 PM
|
|||
|
|||
|
sorry about the delay in pic's,
is this ESC-2 you was on about TT, P6200069.JPG carbs P6200072.JPG dizzy P6200077.JPG coil P6200078.JPG coil wires, does it matter which way round they go on the coil. P6200073.JPG
__________________
If you need a friend, call me, if u need company call me, if you need help call me, if u need money this number is no longer available.
|
|
#3
20th June 2012, 08:26 PM
|
||||
|
||||
|
Ahh, my mistake it runs basic TFI not ESC ( my poor memory ).
But yes that module is your ignition amp. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
|
#4
20th June 2012, 08:27 PM
|
||||
|
||||
|
coil wires
Green to -ve black to +ve
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
|
#5
20th June 2012, 08:28 PM
|
||||
|
||||
|
does the dizzy have a 3 pin plug on the side? You will also need a vacuum feed from the carbs ( idealy a balanced feed from both with check valves ).
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
|
#6
20th June 2012, 08:40 PM
|
|||
|
|||
|
Yes it has the 3 pin plug, i was wonder about vacuum pipe, this is going to sound a bit dopey, but whats a check valve look like and how do i get a balanced feed.
__________________
If you need a friend, call me, if u need company call me, if you need help call me, if u need money this number is no longer available.
|
|
#7
20th June 2012, 08:44 PM
|
||||
|
||||
|
Is there any vacuum take off on the carbs ( I would expect them to have them ) and hopefully each carb will have a combined vac from each venturi.
A check valve is a one way have to prevent one carb from sucking from the other. Ford ones are usualy white and black things with a port at either side. So long as you have a feed from each carb and each carb has a one way valve you should be ok. TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders
|
|
#8
20th June 2012, 09:05 PM
|
|||
|
|||
|
I my have a problem then, as there aren't any take offs on the carbs.
Terry
__________________
If you need a friend, call me, if u need company call me, if you need help call me, if u need money this number is no longer available.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
