|
|
|
|
#1
25th June 2012, 10:32 PM
|
|||
|
|||
Looking good
 Tip: Weld a few tags around before painting to use for earthing engine and other stuff .Its easier to cut them off if not needed than to mop up the tears as you grind your lovely paint off to weld bits on--Dont ask how I know  
|
|
#3
26th June 2012, 09:44 AM
|
|||
|
|||
|
upload your pictures to flickr and paste the link here, no issues them with filesize and resizing.
__________________
Build Cost so far £xxx (Given up adding it up) - She Starts!! Build Thread Here: http://www.haynes.co.uk/forums/showthread.php?t=5501
|
|
#4
26th June 2012, 12:25 PM
|
||||
|
||||
|
Looking great Ben
 Keep the progress pics coming, & as Mike says, use either Flickr or photobucket to make uploading photos easier . Just a quick question...which engine are you using/installing ? as you may find depending on engine choice you might have to remove TR5 as it gets in the way of the carb inlet , cheers andy
|
|
#5
26th June 2012, 01:02 PM
|
|||
|
|||
|
i'm setting up a flickr page now, took me ages to work out the link think but seems so obvious now.
Andy: I'm 90% sure i'll be using a k series 1.8 as i have an mg zr lying around. i will do a trial fit of all the running gear before i paint the chassis though so if there are problems with tr5 i can just cut it out. Cheers Ben
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
