Accelerator cable attach point

[K4KEV]

Hi Sylvain.....weld up hole grind back and re-drill to correct size

[voucht]

Now the pedal are painted, I'm going to waste everything if I try to weld the holes now . But thank you for the advice.
But I I have an idea : you see the crimped collars ("ferules") of my brake lines? They have a 6mm inside diam and a 8mm outside diam, with a small flange, so I will cut 2 of them 10mm long, and use them as hat-spacers on each side of the pedal shaft

[K4KEV]

There you go mate ......you are starting to think like me.