|
|
|
|
#1
6th July 2012, 11:50 PM
|
||||
|
||||
Made a trip down to Stockton yesterday and within 1/2 hr I came away with my chassis number
 .....just needed proof of id so on the way back I nipped into machine mart and got some letter stamps and the result is below ....obviously I am not showing the whole number for security reasons, but after a few practice attempts the actual one I did first time worked out well so this will be the final thing that I weld onto the chassis before painting. Last edited by K4KEV : 7th July 2012 at 10:07 AM. 
|
|
#2
7th July 2012, 11:05 AM
|
||||
|
||||
|
At last....once I have welded the above plate on.... my chassis will be ready to paint....feels like a milestone in the build, must have gone over it about 4-5 times and always finding something else that should or needed to be done, so this is the last time you will see it in this colour.
|
|
#4
7th July 2012, 12:51 PM
|
||||
|
||||
|
Hi Dave ....I took along my sierra's log book which is in my name, but I think anything with your name and address on it like your drivers licence or a utility bill
I think the womans name was Julia or Jullietta she is the only one there that seems to know what to do.....at first I was told I had to build the car then present it.....but I TOLD THEM  that this was incorrect and that other persons had been to this office and came away with a vin number so do not take no for an answer even if you have to wait.
|
|
#6
7th July 2012, 08:26 PM
|
|||
|
|||
|
I sent them a letter using the template on the forum and got one in 2 days from the Newcastle office. I didn't give any ID or vehicle details
David
__________________
Click to see my build photos on Flikr http://www.flickr.com/photos/67112582@N03/ Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack. Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though). Car iva'd and passed 15/08/2014. Finished weight 572kg.
|
|
#7
7th July 2012, 09:04 PM
|
||||
|
||||
|
I suppose some dvla centres are good and some bad
Still not painting yet as I discovered yet another job I had not done, mind you I am pleased I am finding them now rather than after painting, the job was a prop catcher ....kept it very simple with 25mm box...now I might get some paint on it tomoz simple prop catcher 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
