Pedal box/Brake cylinder

[voucht]

Hi,
Are you using a Sierra or another car master-cylinder ?
If you are using a Sierra M/C, 30mm above the lower edge of the plate leaves enough room for a 8mm bolt/nut on the lower fitting hole.
Hope this will help.

[swe7]

Originally Posted by voucht

Hi,
Are you using a Sierra or another car master-cylinder ?
If you are using a Sierra M/C, 30mm above the lower edge of the plate leaves enough room for a 8mm bolt/nut on the lower fitting hole.
Hope this will help.

Yes its a sierra M/C.

Thank you.

Peter.