|
|
#5
8th August 2012, 11:05 PM
|
||||
|
||||
It is a snug fit, but in my case it falls off the front if unsupported. Otherwise, yes, bolts through GRP with large washers. On the bottom mine is overlapping with the chassis tube by only some 7 or 10 mm, so I'll have to make some kind of fixing out of ally. Probably bonded and riveted to the GRP, and rivnut + bolt to the chassis.
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate. 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode