2.0 Zetec & MT75 questions

[alga]

I have Type 9, su there might be some differences (esp. with the bearing), but maybe not. I used a clutch disk and plate from Mondeo Zetec 1.8i (220x26x23) and a Capri release bearing (QH CCT133, LuK 500 0184 10). I hear some people are fine with a normal Sierra bearing. I used the starter from a Sierra CVH 1.8 (bought it together with the sump), although I've heard all CVH and DOHC starters would do (Pinto had the flywheel teeth 15 mm further from the back surface of the engine).