![]() |
|
|
|
#1
|
|||
|
|||
|
I was originally considering a pair of Dominator lights for my car. They cost £35-40 each, are supposed to be IVA compatible (although some, Ash included, have had these fail) and are extremely popular with MEV cars.
After looking at some fitted to cars in real life, I'm now leaning towards some more traditional lights. Boltonbits on eBay sell a pair of 5.75 or 7 inch headlights for £60 delivered, which is a very good price. |
|
#2
|
||||
|
||||
|
I'd been looking at those dominator ones too. I reckon they'd definitely fit!
Just reluctant to part with that much cash if there's any chance they'd fail IVA. I'm starting to think I might just chop the middle out of the brackets I've got and re-weld them shorter. Got to be the cheapest solution! I might have those brackets off you if it all goes horribly wrong though Nathan Either way I think I'll hold off till I've fitted the front wings now so I know exactly how much space I've got to play around with. |
|
#3
|
|||
|
|||
|
alot of reports say thay have a flat dipped beam pattern! and only support lower wattage bulbs so someiva testers fail them
a normal uk dip beam pattern is like 60% of an oval pie angled up with the near side higher than the off side a bodge is to angle the lense or bulb to have a stright but angled beam pattern but i would be safe and iva with somthing more suitable |
![]() |
| Thread Tools | |
| Display Modes | |
|
|