|
|
#5
24th September 2012, 09:26 PM
|
|||
|
|||
The method I use on f/g is to mask up the area to cut and mark your lines on the masking tape. Cut the f/g with a cengar saw http://www.cengar.co.uk/pages/e-range-JP901.html leaving about 3mm from the finished line and dress the cut back with one of those sanding rolls http://greens-garage.com/images/drumsander1.jpg working along the length of the cut being carefull not to flick the gell coat off by turning the drum roll against the line. Works for me. have a couple of practice stabs at it in the middle of the panel thats coming out.
Bob
__________________
When The Results Disagree With The Theory: Believe The Results And Invent A New Theory If I had two brains I,d still be a halfwit The cave http://s1116.photobucket.com/user/my...deshow/mancave The build http://www.haynes.co.uk/forums/showthread.php?t=12669 Last edited by robo : 24th September 2012 at 09:30 PM. 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode